Minolta PageWorks Pro 18 Instrukcja Użytkownika

Przeglądaj online lub pobierz Instrukcja Użytkownika dla Drukuj i skanuj Minolta PageWorks Pro 18. Minolta PageWorks Pro 18 User`s manual Instrukcja obsługi

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj

Podsumowanie treści

Strona 2 - Contents

8Step 34.Place the printer on top of the base unit. Make sure to align the coupling pins of the base unit with the holes located underneath the printe

Strona 3 - Unpacking the Printer

98.Replace the cassette cover and insert Tray 2 into the second paper cassette unit.Note• Be sure to use both hands whenever Tray 2 is being removed f

Strona 4

101.Remove the tray cover from Tray 1.Loading PaperStep 42.Open all three paper size guides.3.Place the paper stack onto the tray, print-side up. Secu

Strona 5 - Reference 1

11Connecting the Power CordStep 51.Make sure that the printer’s power switch is in the O (Off) position.2.Connect one end of the power cord that comes

Strona 6 - Reference 2

121.Turn the printer on.2.Make sure that paper is loaded into the printer’s feeding tray.3.Make sure that both the PAPER and ERROR indicators are off,

Strona 7 - Attaching the Face-Down Tray

131.Make sure that the printer and the computer you are connecting it to are both turned off.2.Connect one end of the interface cable to the parallel

Strona 8

14Install the printer driver to control the printer from your computer.You can install the printer driver for Windows 95, Windows 98, Windows NT 4.0,

Strona 9 - Setting-up Tray 2

15Windows NT 4.0Installing from the CD-ROM (Auto Run)1. Turn on your computer and start up Windows NT 4.0.2. Insert the Printer Driver CD-ROM into you

Strona 10

16Windows 3.1Installing from the CD-ROM1. Turn on your computer and start up Windows 3.1.2. Insert the Printer Driver CD-ROM into your computer’s CD-R

Strona 11

17MS-DOSInstalling DOS Printing Utilities1. Connect your printer to the parallel port of your computer.2. Turn on your computer and start up DOS.3. Tu

Strona 12 - Loading Paper

Step 1Unpacking the Printer ... 1Reference 1Printer Parts... 3Reference 2Control Panel ...

Strona 13 - Turning the Power On/Off

18Clearing a Paper MisfeedRemove the misfed sheet of paper by pulling it in the direction indi-cated by the arrow.Troubleshooting Reference 3Face-down

Strona 14 - Printing a Configuration Page

19Clearing a Paper MisfeedCaution• The fusing unit inside the printer can become very hot during operation.Do not touch the area to avoid injury.• Do

Strona 15 - Connecting the Printer to

20Solving Print Quality Problems• Remove the imaging cartridge and gently shake it a few times to dis-tribute remaining toner.• Remove the imaging car

Strona 19

Copyright1999 MINOLTA CO., LTDPrinted in JapanThe information contained in this manual issubject to change without notice toincorporat

Strona 20 - Reference 3

1Before operating your printer, read the Set-Up Instructions carefully from cover to cover. Use this guide for reference.1.Take the items and accessor

Strona 21

23.Pull out the plastic-lead strip from the paper feed inlet.4.Remove the tape strip from the back of the printer.Step 1

Strona 22

3Printer PartsReference 1Control panelFace-down trayCassette coverPaper size guideManual feed trayTray coverTray 1(multipurpose tray)Tray 2 (500-sheet

Strona 23

4The control panel has three indicator lights and one button.Printer is ready. Receiving data via parallel interface;printing in progress.Power is off

Strona 24

51.With both hands, gently bend the face-down tray inwards and insert one of its tabs into its holder on the upper portion of the printer. Continue to

Strona 25

62.Using the left and right slots in the printer as guides, gently push Tray 1 until it cannot be inserted any further (as shown in the illustration).

Strona 26 - 4110-7742-01

7The second paper cassette unit comes with a cassette that can hold up to 500 sheets of Letter size paper called Tray 2.The same unit can accommodate

Komentarze do niniejszej Instrukcji

Brak uwag